DBX 231S Dual 31 Band Graphic Equalizer Pro Audio Rack Mount EQ + Low Cut Filter. Condition: BRAND NEW IN ORIGINAL PACKAGING. Exceptional sound and rugged reliability. When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx® EQs are the industry standard for touring, studios, and audio installations.
With the dbx heritage of revered pro EQs, the 231s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 231s includes two 31-band channels of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 231s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 231s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing.
With such affordable quality, there's no longer any excuse for compromising your sound. Dual 31-band, 1/3-octave Constant Q frequency bands. Switchable boost/cut ranges of ±6 or ±12 dB.±12 dB input gain range. 4-segment LED ladders for monitoring output levels. XLR and TRS Inputs and Outputs. Dynamic range of greater than 108dB. Input Connectors: 1/4 TRS, female XLR (pin 2 hot).
Input Type: Electronically balanced/unbalanced, RF filtered. Input Impedance: Balanced 40k ohm, unbalanced 20k ohm. Max Input: >+21dBu balanced or unbalanced. CMRR: >40dB, typically >55dB at 1kHz. Output Connectors: 1/4 TRS, male XLR (pin 2 hot).
Output Type: Impedance-balanced/unbalanced, RF filtered. Output Impedance: Balanced 100 ohm, unbalanced 50 ohm. Max Output: >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm. Bandwidth: 20Hz to 20kHz, +0.5/-1dB.
Signal to Noise Ratio: Typically >95dB. Bypass Switch: Bypasses the graphic equalizer section in the signal path. Low cut Switch: Activates the 50Hz 12dB/octave high-pass filter. Selects either +/- 6dB or +/-12dB slider boost/cut range.
Unit Weight: 6.2 lbs. Dimensions: 3.5" (8.9cm) H x 6"(15.24cm) D x 19 (48.26cm) W. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options.
We will send you a. To replace the item for a brand new one.
All replacements and exchanges are free. The item "DBX 231S Dual 31 Band Graphic Equalizer Pro Audio Rack Mount EQ + Low Cut Filter" is in sale since Friday, April 17, 2020.This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Signal Processors/Rack Effects". The seller is "audiosavings" and is located in Inwood, New York.
This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.