Professional CD Recorder / Player. A new TEAC tray-loading transport ensures years of reliable operation in the most demanding installations.
The new transport also allows gapless recording when writing track markers, something not possible using off-the-shelf PC drives. Various recording features like automatic track creation help the operator create polished recordings without constant supervision.
An AKM AK4528VM is used for AD/DA conversion for clean, clear sound quality with a frequency response of 20Hz to 20kHz +/-0.8dB. With the CD-RW901MKII, balanced analog input/output jacks and external control terminals are included.Additionally, long-run continuous recording (and overlap recording) is possible by connecting multiple CD-RW901MKIIs with an accessory cable. An ISRC/RID code can be displayed to check the recording in a mastering studio. Whether used for PA/Sound Reinforcement playback, studio, mastering, or broadcast, the CD-RW900MKII and 901MKII are TASCAM's latest generation of reliable CD recording and playback. Adopts AK4528VM audio codec made by Asahi Kasei Micro devices which has 24-bits processing.
Independent input level controls provide serious level control. Supported media: CD-R, CD-R-DA, CD-RW, CD-RW-DA.CD drive supports playback of CD-DA and Data-CD. High reliability proprietary TEAC tray drive. OPC (optimum power control) function: Adjusting the laser power for each disc type. Fade-in/Fade-out recording function (1 to 30 seconds, 1 seconds increments). Sync recording function: Automatically start/stop recording at a preset level (-24dB to -72dB, 6dB increments). Digital volume for adjusting recording level seriously (-8-54.0dB to 18.0dB). Automatic track division: Automatically insert at rack division at a preset condition. Manual track division: Insert a track division by manual operation. Time track division: Automatically insert a track division per preset interval (1 to 10 minutes, 1 minute increments). Rec-mute function: Recording four seconds of silence on the disc. Selectable maximum recording track numbers (automatically stop at preset number). Erase function: Erase selected track or disc (for CD-RW). Four playback modes (continuous, single, program, random).
Repeat playback function (continuous, single, program, random, A-B). Fade-in/Fade-out playback function (OFF, 1 to 30seconds, 1 seconds increments). Auto-cue function: Automatically pause by detection of a sound of start point in a track. Auto-ready function: Automatically pause at head of next track after playback previous track.Pitch control playback function: Pitch and speed can be varied (+/-16%, 0.1 to 1.0% increments, for CD-DA). Key control playback function: (b1 to b6, #1 to #6, half-note increments, for CD-DA). When using key control function with pitch control function, these function provides speed changing without changing pitch. Unfinalize function (for CD-RW): Erase TOC information of finalized CD-RW. Time display switching (elapsed track/disc time, remaining track/disc time). SRC (sampling rate converter): Automatically convert the incoming frequency to 44.1kHz (for 32 to 48kHz). COAXIAL digital input/output (IEC60958-3:S/P DIF). OPTICAL digital input/output (IEC60958-3:S/P DIF).
Wireless remote controller with 10-key included (forCD-RW900MKII). 3-polar AC sockets with the detachable AC cable.Sync trim function (+/-125 frame, +/-1.67 seconds). Automatic track division with trim function (+/-125 frame, +/-1.67 seconds). Selectable COPY ID (free/1 generation/prohibit/SCMS). Call function: Return to a point at which playback last started from ready mode. EOM (end of message) function: EOM indicator will light-up before the end of track or disc (1 to 99 seconds). Time skip function: While in playback or ready, moves the playback point to forwards or backwards (1 seconds increments). Index search function: Search indexes within a track that were assigned during recording.
Overlap recording function: Using two units CD-RW901MKII to make continuous recording. Fader start/stop control via parallel control connector.
D-sub 9pin RS-232C serial control connector. D-sub 15pin parallel control connector. XLR digital input/output (IEC60958-4:AES/EBU).Time track division added to CD-RW900MKII. Tray loading type CD drive. Playback Deck(s): 1 x CD. Record Deck(s): 1 x CD. Analog Inputs: 2 x RCA. Analog Outputs: 2 x RCA, 1 x 1/4 (Headphones). 1 x S/PDIF (Coax), 1 x S/PDIF (Optical). 19"x 12.2"x 3.7. FREE S&H in continental US. The item "TASCAM CD-RW901MKII Pro Industrial Design Rackmount Recorder / Player / Remote" is in sale since Sunday, November 18, 2018. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Recorders". The seller is "jayplayer" and is located in Palm Coast, Florida. This item can be shipped to United States.