Audio-Technica ATW-1301 System 10 PRO Rack-Mount Transmitter System (2.4 GHz)

  
Audio-Technica ATW-1301 System 10 PRO Rack-Mount Digital UniPak Transmitter System (2.4 GHz). Brand New in its Original Retail Box. Be sure to add me to your favorites list! Here is what you get. System 10 PRO ATW-RC13 Rack-Mount Digital Wireless Receiver (2.4 GHz).

ATW-RU13 System 10 PRO Receiver Unit (2.4 GHz). ATW-T1001 System 10 Digital UniPak Transmitter. 2.4 GHz ISM Band.

Channel Selection, Sync, and Setup. Three Levels of Diversity Assurance. Can be Linked to Ten Receiver Units.

Receiver Units Can Be Mounted Remotely. The System 10 PRO ATW-1301 from Audio-Technica is a digital 24-bit/48 kHz wireless microphone system that operates on the 2.4 GHz ISM band and is used to capture audio for applications such as live stage, theater, DJ setups, and more. The System 10 PRO presents a half-rack chassis that allows you to mount one or two receiver units, however the receiver units can be released from the chassis and mounted remotely (up to 328' away) via Ethernet cable. Up to five chassis or 10 receiver units can be linked using a RJ12 cable, creating a multi-channel system with up to 10 channels.

In addition, other features include an easy-to-read display on each transmitter and receiver unit for quick setup, clear and natural-quality sound, and three levels of diversity, namely frequency, time, and space. Frequency Diversity sends the signal on two allocated frequencies, Time Diversity sends the signal in multiple time slots, and Space Diversity uses two antennas on each transmitter and receiver unit, thus to help maximize signal integrity.

The System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one ATW-RU13 receiver unit with corresponding AT8690 receiver unit mounting brackets, one RJ12 cable, one AC adapter, and one ATW-T1001 UniPak bodypack transmitter. 2.4 GHz ISM band. 200' (60 m) open range environment with no interfering signals. 32 to 104°F (0 to 40°C) battery performance may be reduced at very low temperatures. 20 Hz to 20 kHz (depending on microphone type).

Remote Receiver Connector: RJ45 Link Connector: RJ12. XLR Balanced: 0 dBV 1/4 (6.3 mm) Unbalanced: +6 dBV. 100-240 VAC (50/60 Hz) to 12 VDC 0.5 A power supply switched mode external. Dimensions (W x H x D).

8.26 x 1.73 x 6.67 (209.8 x 44 x 169.3 mm). 33.2 oz (940 g).

2.24 x 0.75 x 3.06 (57 x 19 x 77.6 mm). 2.3 oz (64 g).

5.8 x 4.3 x 3.4. > 109 dB (A-weighted), typical.

20 Hz to 20 kHz. 24 bit / 48 kHz. Following federal and national regulations. Four-pin Locking Connector: Pin 1 - GND, Pin 2 - INST INPUT, Pin 3 - MIC INPUT, Pin 4 - DC BIAS 9 V. Two 1.5 V AA (not included).

32 to 104°F (0 to 40°C). 2.76 x 4.21 x 0.98 (70.20 x 107.00 x 24.9 mm). 3.5 oz (100 g).

5.7 x 3.4 x 2.4. 9:30am - 5:00pm Est.

9:30am - 12:00pm Est. Therefore, we offer UPS 3 Day Select and UPS Next Day Air Saver for a special low rate. Attention Canadian and International Buyers. UPS is available upon request.

The item "Audio-Technica ATW-1301 System 10 PRO Rack-Mount Transmitter System (2.4 GHz)" is in sale since Monday, March 16, 2020. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Microphones & Wireless Systems". The seller is "thecamerabox" and is located in Brooklyn, New York. This item can be shipped to United States.

1. Type: Wireless
2. MPN: ATW-1301
3. Brand: Audio-Technica