The firmware was recently updated to version 1.35. The disk drive holders are in good condition - two of them have hairline cracks in the plastic handle locks but operate normally.
The front cover, cover lock and key are in excellent shape and both original front filters are present and recently cleaned. The cover lock operates normally with the supplied high-security keys. The power cord is in excellent shape. The two rack brackets are in good condition and show normal marking from rack screws. Two sizes of rack screws are included.
One 3 TB disk drive is included, and it boots up the NAS with no errors. The two rack brackets are set up for 2-post mounting, which allows installation in either 2-post or 4-post racks. The rack space used is "1U" (about 1.75 inches). The wheels for a 4-post rack are included, but no front-to-back additional rack guides are included (see pictures and list below for all items included in this listing).
It has been tested with Seagate diagnostic software and has no reassigned sectors and passes all diagnostic tests. After additional disk drives are installed by you, various storage configurations including RAID may be specified using the web-based, built-in status and configuration software. The built-in software is accessed through the NAS Navigator which may be downloaded from the link below. We recommend you change it at your earliest opportunity. Documentation, Firmware, and Utilities may be found at.
This link has the most recent documentation - it is better to use this link rather than the built-in user manual link in the NAS Navigator (latest firmware updates are available through the NAS Navigator). Please note: Firmware update through the NAS claims that 1.35 is the latest firmware, but the web link above claims the latest firmware is 1.36. We recommend you use 1.35 firmware until the NAS announces a firmware update is available. 1 - Buffalo Technology rack-mountable (1U) four drive chassis with power cord retention holder.
1 - Seagate Model ST3000DM001 3TB 7200 RPM Hard Disk Drive (HDD) with Buffalo Technologies Boot Software (mounted in NAS position 1). 1 - Original Buffalo Technology removable lockable front cover with original dust filters.
2 - Original Buffalo security keys to lock/unlock the front panel. 1 - UL-rated 6-foot Power Cord (not original).
4 - Original Buffalo Technology Disk Drive Holders (one with the 3TB drive installed). 12 - Original 6-32 x 5/32 Phillips pan head disk drive mounting screws (4 per empty disk holder). 4 - 12-24 x 5/8 New (unused) Rack Mounting Screws.
4 - 10-32 x 1/2 New (unused) Rack Mounting Screws. Miscellaneous Original Buffalo Technologies Documentation including the original CDROM. This item is in the category "Computers/Tablets & Networking\Drives, Storage & Blank Media\Other Drives, Storage & Media".
The seller is "dburtis2" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, Korea, South, Taiwan, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Brunei Darussalam, Bolivia, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Oman, Pakistan, Paraguay, Reunion, Uruguay.