Your #1 Source for Audio, Video and Speaker Building Components. Denon DN-312X Rack Mount 12-Channel Line Mixer. Denon's DN-312X is a 1U rack-mounted 12-channel mixer that can solve countless audio challenges. It features 6 mic/line combination inputs with HDHQ? Denon-Marantz proprietary mic pre####x2019;s each with switchable phantom power and 6 additional line-level inputs.It has balanced XLR outputs, a 1/4-inch (6.3mm) mono output that can be used to connect the DN-312X to a remote mixer, a pair of RCA stereo outputs to connect to a remote recording device, and 1/4-inch (6.3mm) mic monitoring port that can be used to monitor the mics####x2019; signals. The DN-312X provides individual level control for all inputs in addition to level control for the mono output port and a master level control. Rounding off the feature set, It has a 3-level equalizer and a controlled priority for Mic/Line 1.
It can be powered from standard AC or a 24V DC power source, inviting it to be used in a variety of applications; everything from a classroom to a tour bus. Mic/Line Input Specifications (CH 1-6): ####x2022; Frequency response: 20 - 22,000 Hz (######xB1;2 dBu) ####x2022; Mic/line input jacks: XLR + 1/4'' combination, electronically balanced, discrete input configuration ####x2022; THD+N. 103 dB ####x2022; Phantom power: +18 - 21V, switchable.Line Input Specifications (CH 1-6): ####x2022; Same as above, except: Sensitivity: 0 dBu ####x2022; Maximum input level: +21 dBu ####x2022; Maximum voltage gain: 20 dB (mic input to line, mic, and mono out); 10 dB (mic input to record out). Line Input Specifications (CH 7/8 - 11/12): ####x2022; Line input jacks: Stereo RCA pairs, electronically balanced ####x2022; Sensitivity: +10 dBu ####x2022; Maximum input level: +21 dBu ####x2022; Maximum voltage gain: 10 dB (line input to line out); 0 dB (line input to record out); 4 dB (line input to mono out) ####x2022; SN ratio: > 103 dB. General Specifications: ####x2022; Impedance: Mic/line input: 1,400 ohms; line input: > 10,000 ohms; all outputs: 120 ohms ####x2022; Supply voltage: 120 VAC, 60 Hz ####x2022; Weight: 6.4 lbs. (2.9 kg) ####x2022; Dimensions (with rack ears): 19.00'' x 7.7'' x 1.73'' (483 x 195 x 44 mm). 6 combination inputs with mic/line and phantom power selector switches. 6 mono (3 stereo pair) RCA inputs. Mono 1/4####x201D; line output can be used to feed audio to external recording device. Please note: eChecks will delay your order.
We will not begin processing your order until the funds have cleared. ECheck payments take longer to clear and will result in longer processing time. We will not be responsible for incidental or consequential damage due to defective or improper use of products.The foregoing shall be the exclusive remedy for defective or nonconforming merchandise. Damaged Merchandise - Carriers will not permit claims after 5 days. We will file a Damage Inspection Claim which results in a carrier follow-up to inspect your package. Carrier requires recipient to retain all boxes, labels, and packing materials until the claim has been approved.
Please follow the Return Terms and Conditions before returning products. Write the RA# clearly on the outside of the outer carton. And printed material booklets, manuals, instructions, etc. Package the product to protect it from damage in route to Parts Express. Insure the package for the value of the product.
Insufficient packaging may be cause for some carriers to deny damage claims. Books/CD's/Software (once seal is broken). Custom cut cable/wire, carpet, grill cloth, and tubing. Products with visible signs of use such as mounting marks, scratches, solder, sealing caulk, dirt, sawdust or other debris/residue, extreme odors such as cigarette smoke.
Distinct burn odor and/or discolored/black spider around base of cone are characteristic of a burned voice coil. We will return at the customer's expense or destroy/discard after 60 days. Each speaker order includes the following instructions: To "audition" a speaker without scratching or marking it will require getting into the speaker cabinet and listening to it play without actually mounting it with screws. This can be done by tilting the cabinet back and setting the speaker in place.If the cabinet has bare wire leads, just wrap them around the solder lug connector on the back of the speaker to make the electrical connections. A friend can help hold the speaker in place while you listen to the new speaker.
This is, of course, not an optimal way to listen to a speaker, but will give you the opportunity to identify major response problems or poor tonal characteristics prior to mounting. FEEDBACK We are committed to your satisfaction. We want you to be happy with your order.Please let us know if you are not satisfied before leaving feedback so we can resolve the issue. Thank you for your business and we are happy to serve you as our valued customer.
Talent VB1 Folding Portable Vocal Booth. Stahl Tools SSVT Variable Temperature Soldering Station 374-100. Aura AST-2B-4 Pro Bass Shaker Home Theater Subwoofer. Dayton Audio IO525W 5-1/4 2-Way Indoor/Outdoor Speaker Pair.
Be the first to hear about new and exciting products, special pricing and incredible deals! This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Speaker Drivers & Horns".partsexpress" and is located in this country: US.This item can be shipped to United States.