Mackie 1402VLZ4 14-ch. Pro Mixer with6 ONYX Preamps+RM1402-VLZ Rack Mount Kit+Mic

Package: Mackie 1402VLZ4 14-channel Compact Analog Low-Noise Mixer with 6 Boutique-Quality Onyx Mic Preamps + Mackie RM1402-VLZ Rack Mount Kit For 1402-VLZ3 And 1402 VLZ Pro + Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Mackie 1402VLZ4 14-channel Pro Mixer. (1) Mackie RM1402-VLZ Rack Mount Kit.

(1) Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables. Each generation of VLZ mixers benefits from a reinvestment in performance, all without raising prices. By continuing to ignore the "race to the bottom, " VLZ4 benefits from generations of performance improvements like transparent EQ, class-leading negative summing bus architecture and custom-designed op-amps to ensure signal integrity from every input to every output.

The result is a mixer that is at the peak of performance and is the obvious go-to compact analog mixer for engineers who demand professional results. ONYX PREAMPS The performance of Mackie's Onyx mic preamps is more than proven. Just check all the amazing reviews and customer testimonials.

Their boutique quality sound and unmatched performance rival any high-priced, boutique preamp on the market. Adding these flagship preamps to our VLZ4 Series compact mixers underlines our commitment to continually improving the performance of the VLZ line with each generation. HIGH HEADROOM / LOW NOISE The VLZ4 design goal was simple: every VLZ4 mixer must have the highest headroom and lowest noise possible. Strict attention to component quality and tolerances has led to innovations like our custom M80 op-amps and class-leading negative summing bus architecture that add yet another level of assurance that a Mackie VLZ4 mixer is the right choice for your professional audio application. BUILT LIKE A TANK Mackie VLZ mixers are truly Built-Like-A-Tank. From beer spills to drops from moving vehicles, the testimonials are as endless as the applications Mackie mixers serve. The VLZ4 series is certainly no exception. VLZ4's new black powder coat finish, cockpit-inspired controls and high-contrast knobs not only optimize your mixer's usability in low-light scenarios, it also means your mixer looks as good as it performs. COMPREHENSIVE AND PROVEN Mackie's VLZ4 line is extremely comprehensive, offering mixers of every channel count, every price point, for every application. From the ultra-compact 402VLZ4 for desktop applications to the tour-friendly 3204VLZ4, you can be sure there is a VLZ4 mixer with the right feature set for your needs. Mackie 1402VLZ4 14-channel Compact Mixer. 14-channel mixer featuring Mackie signature high-headroom/low-noise design.

6 boutique-quality Onyx mic preamps. 128.5 dB dynamic range.

Distortion under 0.0007% (20Hz - 50kHz). Improved RF rejection perfect for broadcast applications. Phantom power for condenser mics.

14 high-headroom line inputs with +4/-10 operation control. 3-band EQ (80Hz, 2.5kHz, 12kHz). 18 dB/oct 75Hz low-cut filter on mic input channels. 2 aux sends, level, pan and PFL solo on each channel.

ALT 3/4 stereo bus for added routing flexibility. Control room / phones source matrix. Sealed rotary control resist dust and grime.

"Built-Like-A-Tank" rugged steel chassis with powder-coat finish. High-visibility, high-contrast controls deliver convenient "at-a-glance" visual feedback.

Rack-mountable design using optional rack ear kit. Multi-voltage power supply for worldwide use. 20 Hz-20 kHz bandwidth, 1/4 main out, channels 1-6 gain At unity, channel EQs flat, all channels assigned to main mix. Channels 1, 3 and 5 panned left, 2, 4 and 6 panned right. Main mix fader down, channel faders down: -101 dBu.

Main mix At unity, channel faders down: -91 dBu. (95 dB Signal to Noise Ratio, ref +4 dBu). Main mix fader At unity, channel faders At unity: -86 dBu.

Total Harmonic Distortion (THD): (1 kHz At 35 dB gain, 20 Hz-20 kHz bandwidth) Mic pre At insert. (1 kHz relative to 0 dBu, 20 Hz-20 kHz bandwidth, line in, 1/4main out, gain At unity). Main mix fader down: -100 dBu. Channel Alt / Mute switch engaged: -90 dBu. Channel fader down: -90 dBu.

Frequency Response Mic input to main output (gain At unity). +0, -1 dB, 20 Hz to 50 kHz. Equivalent Input Noise (EIN)(Mic input to insert send out, max gain). 150 ohm termination -128.5 dBu, 20 Hz-20 kHz. Common Mode Rejection Ratio (CMRR). 1 kHz better than -70 dB. All other inputs: +22 dBu. Main mix XLR out: +28 dBu. All other outputs: +22 dBu. Mic in: 2.5 k ohm. Channel insert return: 2.5 k ohm. All other inputs: 10 k ohm or greater. Tape out: 1.1 k ohm.

All other outputs: 120 ohm. High Shelving: ±15 dB At 12 kHz. Mid Peaking: ±15 dB At 2.5 kHz.

Low Shelving: ±15 dB At 80 Hz. US, JP: 100 - 120 VAC, 50 - 60 Hz.

EU, UK, AU, CN: 200 - 240 VAC, 50 - 60 Hz. Operating Temperature: 0° - 40°C, 32° - 104°F. 100-120V 500 mA slo blo, 5 x 20 mm. 220-240V 250 mA slo blo, 5 x 20 mm. Physical Properties (product): 12.5" x 3.2" x 14.

Weight 9.5 lb / 4.5 kg. Physical Properties (packaged product): 6.9" x 16.1" 15.2. Weight 12.0 lb / 5.4 kg.

Mackie Rackmount Brackets Designed specifically for 1402-VLZ3 and 1402-VLZ PRO. Allows you to install mixer in any standard rack. Turns your 1402-VLZ Pro or 1402-VLZ3 into a rack-mounted mixer with space for cable pass-through and connections. How to Set Up RMC-XLR.

The Rockville RMC-XLR is the same exact microphone we use in our Pro Mic Kit 1 microphone/stand bundle. This mic was created because we saw a need in the market for a high quality microphone at an affordable price. We found there were a lot of good mics around from reputable brands that sound great, but are very expensive. When we looked at the cheaper mics on the market from both reputable and entry level brands; we were not impressed at all.

As a result we sent our very own product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all loved. You may be asking yourselves, so what makes this mic sound so good? There are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable.

Our mic uses an M-56 cartridge which has a neodymium magnet. They have very little background noise, and great tone. We pay a lot of attention to detail. We are very passionate about our products and we really have a lot of respect for our customers.

For this reason alone we included 100 % OFC copper cables. There is no aluminum in this cable! It is Pure oxygen free copper. What this means is that the cable will last longer and will sound a lot better. You will get a distortion free signal. We use a true gauge mic cable with proper thickness. The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it.

We could have gone with plastic or cheaper metal, but we wanted to go with a mic that we ourselves would want to use. (2) 100% OFC Copper Mic cables (XLR to ¼ + XLR to XLR). Rockville RMC-XLR High-End Metal Handheld Wired Microphone Mic Amazing Sound! Frequency Response: 80 - 13Khz. Impedance: 600 Ohms ± 30%.

High quality plastic carry case protects the mic during transportation. Comfortably holds microphone and mic cable. 100% OFC oxygen free copper. Cable delivers crystal clear distortion free signal. Cable is 5 MM thick with cover (22 AWG standard mic cable).

XLR cable connectors are very solid and durable. Heavy Duty Standard Size Microphone Clip. Solid Plastic Construction with copper inside (part that screws to the mic). If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a.

To replace the item for a brand new one. All replacements and exchanges are free. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Live & Studio Mixers". The seller is "audiosavings" and is located in this country: US. This item can be shipped to United States.

Brand: Mackie
MPN: 1402VLZ4+RM1402-VLZ
UPC: 613816998814
Analog/Digital: Analog
Powered/Non-Powered: Non-Powered
Input/Output Ports: Analog XLR In, Analog XLR Out, RCA In (AES3), RCA Out (AES3), XLR Out (AES3), TRS 6.35mm (1/4in.) In, TRS 6.35mm (1/4in.
) Out
Suitable For: Front of House (FOH), Monitor, Recording & Live Sound, Stage/Live Sound, Studio/Recording
Features: 3-Band Equalizer, Fader-Type Control, Kill Switch, PFL/Solo Bus, Phantom Power, Rack-Mountable, Send/Return
Number of Channels: 14
Number of Buses: 4
Number of Mic Inputs: 6
Number of Line Inputs: 14
Number of Phono Inputs: 0
Type: Compact Mixer
Model: 1402VLZ4+RM1402-VLZ
Country/Region of Manufacture: China