Each channel features two inputs that are merged to mono using a resistive mixer. This means the user can use either input for a mono source. For a stereo source such as a synthesizer or digital piano, connecting the instrument to the two inputs will yield a mono mix at the XLR output. For those wishing to connect a high output device like a CD player to the unit, a -15dB pad reduces the input level going to the transformer and avoids saturation.The 1/4 THRU connector is a direct feed that is used for a personal monitoring system. A 180° polarity reverse switch is internally mounted and factory set with pin-2 hot. An effects-loop on every channel allows the two inputs on each channel to share the same effects processor. The THRU output can be assigned either pre or post the effects-loop depending on individual requirements. For greater system setup flexibility, the ProD8 features a reversible set of rack ears that allows the 1/4 input panel or the XLR output panel to be positioned at the front or back.
Each channel transformer isolated to eliminate noise. Each channel features an effects-loop that works like an insert on a mixing console.
Pad switch engages a -15dB pad to reduce the input level and prevent overload from high output devices. Military-grade double-sided PCB is bolted to steel standoffs for road-tough construction.
Connectors are 100% electrically isolated from the chassis. Can drive a guitar signal 300 feet without loss. 15dB pad switch Ground lift switch Phase switch. Reversible rack ears allow for setting up the ProD8 with either the 1/4 jacks or XLR connectors facing front.
This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Signal Processors/Rack Effects". The seller is "liquid-audio" and is located in this country: US. This item can be shipped to United States.